How to replace the cabin air filter — Toyota Camry 2020

Tools you'll need

• Phillips screwdriver (if needed)
• Rags
• Gloves
• Flashlight
• Small trash bag for the old filter

Parts you'll need

• New cabin air filter

Steps

1. Open the glove box and empty itSit in the passenger seat, open the glove box, and take everything out so you can work freely.
2. Drop the glove box downUnhook the damper arm on the right side of the glove box, then squeeze both sides of the box inward so it swings down past its stops.
3. Open the filter coverBehind the glove box you will see a long rectangular cover. Squeeze the tabs on each end and pull the cover off.
4. Slide out the old filterPull the old filter straight out of its slot. Note the airflow arrow printed on the side so the new filter goes in facing the same way.
   Tip: If the old filter is very dirty, it explains weak airflow or a musty smell.
5. Slide in the new filterSlide the new filter into the slot with the airflow arrow pointing down, the same way the old one faced. Push it in until it sits flat.
6. Refit the cover and glove boxSnap the cover back on, lift the glove box back into place, and reconnect the damper arm. Close the glove box and run the fan to check the airflow.

Safety first

This is a simple job with no tools required on most Camrys. If anything feels stuck, do not force it; have a qualified technician do this job.