How to replace wiper blades

Tools you'll need

• Rags
• Windshield cleaner
• Gloves
• Flashlight
• Old towel to protect the glass

Parts you'll need

• New wiper blades (match the lengths in your owner's manual)

Steps

1. Find the right blade sizeCheck your owner's manual or the fitment guide at the parts store for the correct blade lengths. The driver and passenger blades are often different sizes.
2. Lift the wiper arm off the glassPull the wiper arm away from the windshield until it stands up on its own. Lay a folded towel on the glass under the arm so the bare arm cannot snap back and crack the windshield.
3. Remove the old bladeFind the small tab or button where the blade meets the arm. Press it and slide the old blade down and off the hook.
   Tip: Most cars use a hook-style arm; some use a pin or a push-button clip.
4. Slide on the new bladeSlide the new blade onto the arm hook until it clicks into place. Give it a gentle tug to make sure it is locked.
5. Lower the arm and repeat on the other sideEase the arm back down onto the glass gently. Repeat the same steps for the other wiper blade.
6. Test with washer fluidSpray washer fluid and run the wipers on low and high speed. They should wipe clean with no streaks, skipping, or chatter.
   Tip: Clean the windshield first so dirt does not wear out the new rubber.

Safety first

Never let a bare wiper arm snap back onto the glass; it can crack the windshield. If you are not confident, have a qualified technician do this job.