Home / OBD Codes / P0102

P0102

Mass Air Flow (MAF) Sensor — Signal Too Low

Medium — fix within daysDrive with caution

Severity: Fix within days. Drive with caution and watch for new symptoms.

What P0102 means

The air-flow sensor is reporting less air than the engine is actually taking in, or its signal is weaker than the computer's minimum.

Common causes

How to fix it

Clean the sensor, check its wiring and connector, and replace the sensor if the low signal persists.

Can I drive with P0102?

The engine may stall at idle and feel weak. Short trips with care are usually fine.

Related codes

Questions, answered

Is it safe to drive with code P0102?

You can drive short distances carefully; watch for worsening symptoms. The engine may stall at idle and feel weak. Short trips with care are usually fine.

What causes code P0102?

The most common causes are: Dirty or contaminated MAF sensor; Wiring short or damaged connector; Air leak before the sensor; Failing MAF sensor. A scan tool and a visual check of the parts above is where a technician starts.

How do I fix code P0102?

Clean the sensor, check its wiring and connector, and replace the sensor if the low signal persists.

Not repair advice. This page gives general information about code P0102 only. Cars differ by make, model and year — confirm the fault with a scan tool and have the repair done by a qualified technician.

← Back to all OBD codes

Advertisement