Home / OBD Codes / P0328

P0328

Knock Sensor — Signal Too High (Bank 1)

Medium — fix within daysDrive with caution

Severity: Fix within days. Drive with caution and watch for new symptoms.

What P0328 means

The knock sensor on bank 1 is sending a stronger signal than expected, which the computer may read as constant knocking and respond to by cutting power.

Common causes

How to fix it

Check the wiring for shorts and the sensor mounting, then replace the sensor if the reading stays high.

Can I drive with P0328?

The engine may lose power as the computer retards timing. Drivable with care.

Related codes

Questions, answered

Is it safe to drive with code P0328?

You can drive short distances carefully; watch for worsening symptoms. The engine may lose power as the computer retards timing. Drivable with care.

What causes code P0328?

The most common causes are: Failed knock sensor; Shorted wiring; Engine noise from worn parts; Sensor over-torqued. A scan tool and a visual check of the parts above is where a technician starts.

How do I fix code P0328?

Check the wiring for shorts and the sensor mounting, then replace the sensor if the reading stays high.

Not repair advice. This page gives general information about code P0328 only. Cars differ by make, model and year — confirm the fault with a scan tool and have the repair done by a qualified technician.

← Back to all OBD codes

Advertisement