Home / OBD Codes / P0452

P0452

Evaporative Emission (EVAP) Pressure Sensor — Signal Too Low

Low — fix soonSafe to drive for now

Severity: Fix soon. Usually safe to drive for now.

What P0452 means

The fuel vapor pressure sensor is sending a signal below its minimum, which usually means a wiring fault or a failed sensor.

Common causes

How to fix it

Inspect the wiring and connector, then replace the pressure sensor if the signal stays low.

Can I drive with P0452?

Safe to drive. Emissions monitoring only.

Related codes

P0401Exhaust Gas Recirculation (EGR) — Not Enough FlowP0402Exhaust Gas Recirculation (EGR) — Too Much FlowP0403Exhaust Gas Recirculation (EGR) — Circuit ProblemP0410Secondary Air Injection System Problem

Questions, answered

Is it safe to drive with code P0452?

Generally safe to drive, but get it checked soon. Safe to drive. Emissions monitoring only.

What causes code P0452?

The most common causes are: Failed fuel tank pressure sensor; Shorted wiring; Damaged connector; Blocked EVAP hose. A scan tool and a visual check of the parts above is where a technician starts.

How do I fix code P0452?

Inspect the wiring and connector, then replace the pressure sensor if the signal stays low.

Not repair advice. This page gives general information about code P0452 only. Cars differ by make, model and year — confirm the fault with a scan tool and have the repair done by a qualified technician.

← Back to all OBD codes

Advertisement