Home / OBD Codes / P0740

P0740

Torque Converter Clutch — Circuit Problem

High — fix right awayDo not drive

Severity: Fix right away. Driving risks expensive damage or a breakdown.

What P0740 means

The computer found a fault in the circuit for the torque converter clutch, the lock-up that connects the engine directly to the transmission at cruising speed to save fuel.

Common causes

How to fix it

Check the fluid level and condition, test the solenoid, and have the converter checked by a transmission shop.

Can I drive with P0740?

You may feel shuddering at highway speed and use more fuel. Get it checked — a failing converter can contaminate the transmission.

Related codes

Questions, answered

Is it safe to drive with code P0740?

Avoid driving until it is checked — towing is the safer choice. You may feel shuddering at highway speed and use more fuel. Get it checked — a failing converter can contaminate the transmission.

What causes code P0740?

The most common causes are: Failed torque converter clutch solenoid; Damaged wiring; Low transmission fluid; Failing torque converter; Worn clutch material. A scan tool and a visual check of the parts above is where a technician starts.

How do I fix code P0740?

Check the fluid level and condition, test the solenoid, and have the converter checked by a transmission shop.

Not repair advice. This page gives general information about code P0740 only. Cars differ by make, model and year — confirm the fault with a scan tool and have the repair done by a qualified technician.

← Back to all OBD codes

Advertisement