Home / OBD Codes / P0107

P0107

Manifold Absolute Pressure (MAP) Sensor — Signal Too Low

Medium — fix within daysDrive with caution

Severity: Fix within days. Drive with caution and watch for new symptoms.

What P0107 means

The intake pressure sensor is sending a signal below the computer's minimum, which usually points to a wiring fault or a failed sensor.

Common causes

How to fix it

Inspect the sensor wiring and vacuum hose, then test and replace the sensor if needed.

Can I drive with P0107?

The engine may run poorly and lack power. Short careful trips are usually possible.

Related codes

Questions, answered

Is it safe to drive with code P0107?

You can drive short distances carefully; watch for worsening symptoms. The engine may run poorly and lack power. Short careful trips are usually possible.

What causes code P0107?

The most common causes are: Shorted MAP sensor wiring; Failed MAP sensor; Open or disconnected vacuum hose; Corroded connector. A scan tool and a visual check of the parts above is where a technician starts.

How do I fix code P0107?

Inspect the sensor wiring and vacuum hose, then test and replace the sensor if needed.

Not repair advice. This page gives general information about code P0107 only. Cars differ by make, model and year — confirm the fault with a scan tool and have the repair done by a qualified technician.

← Back to all OBD codes

Advertisement