Home / OBD Codes / P0123

P0123

Throttle Position Sensor — Signal Too High

Medium — fix within daysDrive with caution

Severity: Fix within days. Drive with caution and watch for new symptoms.

What P0123 means

The throttle position sensor is sending a signal above its maximum, which usually means a wiring fault or a sensor stuck at a high reading.

Common causes

How to fix it

Check the wiring for shorts and replace the sensor if its reading stays pegged high.

Can I drive with P0123?

The engine may idle high or surge. Drive carefully and get it checked soon.

Related codes

Questions, answered

Is it safe to drive with code P0123?

You can drive short distances carefully; watch for worsening symptoms. The engine may idle high or surge. Drive carefully and get it checked soon.

What causes code P0123?

The most common causes are: Failed throttle position sensor; Short to power in the wiring; Damaged connector; Faulty throttle body. A scan tool and a visual check of the parts above is where a technician starts.

How do I fix code P0123?

Check the wiring for shorts and replace the sensor if its reading stays pegged high.

Not repair advice. This page gives general information about code P0123 only. Cars differ by make, model and year — confirm the fault with a scan tool and have the repair done by a qualified technician.

← Back to all OBD codes

Advertisement